Natural White LED Strip 5m — 120 LED/m IP20

The sensible choice where the strip lights a surface rather than your eyes. At 120 LEDs per metre and 9.6 W/m this reel gives an even 800-lumen wash per metre while drawing two-thirds the power of the high-density version — which also means smaller drivers and longer runs before voltage drop matters.

4000K natural white suits over-cabinet coves, shelf lighting and anywhere the reflection does the work. If the diffuser is visible at close range, step up to the 240 LED/m version for a fully dot-free line.

Built on the manufacturer's Plus Series specification: Epistar LED chips, Intermatix phosphor, ShinEtsu & Dow Corning encapsulation glue and Heraeus 99.99% pure gold bond wire, mounted on a 3oz-copper white PCB for proper heat spreading and stable output along the full run.

Key features

• 120 LEDs per metre — even wash for indirect lighting
• 800 lm/m at just 9.6 W/m
• Cuttable every 50 mm (6 LEDs) at marked points
• 10 mm wide PCB — fits all our aluminium profiles
• Epistar chips on a 3oz-copper PCB
• PWM dimmable with any of our controllers
• Fit in an aluminium profile — heat-sinking is mandatory

In the box

• 1 × 5 m LED strip reel with 3M 300LSE self-adhesive backing
• 200 mm input cable pre-soldered to one end
• Anti-static (ESD) protective packaging

Pairs with

• Aluminium profiles — diffuse the strip into one continuous line of light
• 24V constant-voltage LED drivers
• Wi-Fi & RF controllers — dimming, tunable white and colour control
• Connectors, hippo joints and DC cable