Plaster-In Wall Wash Profile

A plaster-in profile with a 60 mm curved reflector moulded into it. Rather than pointing the strip at the room, it throws the light sideways along the adjacent surface, so the wall or ceiling itself becomes the light source.

That curve is what separates a wash from a stripe. Aimed down a staircase, along a ceiling or out from a skylight reveal, it produces a soft gradient that falls away gently instead of a hard-edged line — the effect people mean when they say lighting should be felt and not seen.

Strip recommendation — 240 LED/m. We recommend our 240 LED/m high-density strip in this profile. The closer LED spacing reads as one continuous line of light rather than a row of individual dots — cleaner both where the diffuser is visible and where the light is washing a surface.

Key features

• 60 mm curved reflector — a true wash, not a stripe
• Plasters in flush for a trimless finish
• 1.8 mm plaster flange keys into the skim
• 96 mm overall width, 18.5 mm deep
• Powder-coated white — disappears into the plaster
• Available in 2 m, 2.5 m and 3 m lengths

In the box

• 1 × Plaster-in wall wash profile
• 1 × White PC diffused cover (fitted)
• 2 × End caps

Compatible with

• Our 240 LED/m high-density 24V strip reels — recommended for this profile
• 24V constant-voltage LED drivers
• Wi-Fi & RF controllers — app, voice and wall-panel control
• Connectors, hippo joints and DC cable