T24 4-Zone RGBW Wall Switch — White

What it’s for: full-colour RGBW control with a linear slide. The SkyDance T24 is a glass touch panel in a white finish with a vertical colour slide — sweep your finger along the spectrum for smooth, accurate colour, tap W for the dedicated white channel, or play 10 built-in dynamic modes. It controls up to 4 zones of RGB/RGBW strip through SkyDance 2.4G RF receivers.

Powered by two AAA batteries, it needs no wiring: screw it to a standard European 86-size wall box or stick it straight to the wall with the adhesive pad. Touch keys give a soft chord tone and LED confirmation with every press.

Key features

• Ultra-sensitive glass touch panel with linear RGB colour slide
• RGBW: short-press W to toggle the white channel, long-press to trim its brightness
• 10 built-in dynamic modes with mode-cycle and 10-level speed/brightness key
• 4 zones — run separately or together; each zone controls multiple receivers
• Touch keys with chord tones and LED indicator
• RF 2.4GHz with 30 m range — pairs with SkyDance receivers in seconds
• Fits a standard European 86-size wall box, or adhesive mounting — no wiring
• 2 × AAA batteries · ≈ 1 year standby

In the box

• 1 × T24 touch panel (white)
• Installation rack & fixings
• User manual

Compatible with

• SkyDance Wi-Fi & RF LED controllers — pair with any panel in seconds
• Our 24V LED strip reels

3-year warranty.

For setup, pairing and full technical detail, the official SkyDance user manual is attached at the bottom of this page.