CCT-Tunable LED Strip 5m — 2700K–6500K 240 LED/m

One strip, every white. Alternating warm (2700K) and cool (6500K) chips — 120 of each per metre — mix to any colour temperature in between, so the same cove can be candle-warm for a film and daylight-crisp for cleaning. Pair it with one of our tunable-white controllers and the whole range sits on a slider.

Because the warm and cool LEDs alternate every 4 mm, the mix is seamless in a profile — comparable to a 2-in-1 chip, without its output compromise. Note this strip runs at 22 W/m with both channels driven, so it must be mounted in an aluminium profile, which acts as its heat sink.

Built on the manufacturer's Plus Series specification: Epistar LED chips, Intermatix phosphor, ShinEtsu & Dow Corning encapsulation glue and Heraeus 99.99% pure gold bond wire, mounted on a 3oz-copper white PCB for proper heat spreading and stable output along the full run.

Key features

• Fully tunable 2700K–6500K white
• 240 LEDs per metre (120 warm + 120 cool) — seamless mixing
• 1000–1130 lm/m depending on mix
• Cuttable every 50 mm (12 LEDs) at marked points
• Requires a tunable-white (CCT) controller — see below
• Must be fitted in an aluminium profile for heat-sinking

In the box

• 1 × 5 m LED strip reel with 3M 300LSE self-adhesive backing
• 200 mm input cable pre-soldered to one end
• Anti-static (ESD) protective packaging

Pairs with

• Wi-Fi & RF controllers — dimming, tunable white and colour control
• Aluminium profiles — diffuse the strip into one continuous line of light
• 24V constant-voltage LED drivers
• Connectors, hippo joints and DC cable